Technocarb SVIS (Sequential Vapor Injection) Conversion Kit
Digitally Controlled, Sequential Vapor Injection Conversion Kit. The
closed loop LPG or CNG digital controller is an advanced computerized
device factory pre-programmed for each specific application.
Digital signals gathered from the engine operation, such as the exhaust gas oxygen content, RPM, TPS, Fuel Pressure, Vacuum Pressure, Fuel Temperature and Gasoline Injector Actuation Pulses.
In many late model applications the SVIS can connect directly to the OBDII system.
This digital system controls and adjusts the LPG or CNG ratio by precisely pulsing measured vapor fuel (measured in milliseconds) to each separate cylinder injector.
Vapor injectors are installed directly into the intake manifold as close as possible to the OEM gasoline injectors virtually eliminating “lag” found in other systems.
The digital controller keeps the onboard gasoline computer active in its monitoring, diagnostics and controlling functions even while the vehicle operates on the alternative fuel.
Technocarb CNG or LPG digital controllers allow for full on road
diagnostics, calibration and configuration utilizing user-friendly
Windows based platform software which will run on a laptop or desktop
computer. Many vehicle applications allow for direct connection to the
OBDII diagnostic port (CAN Bus) allow unequalled performance and
enabling fuel trim data to be read on your laptop (no need to use a
separate OBDII scan tool!)
State of the art injectors SPECIFICALLY designed for vapor fuels (unlike re-worked gasoline injectors) give superior performance and durability while also being more forgiving of contaminated fuel.
All components meet US/Canadian and International safety standards.
All LPG and CNG regulators are specifically designed and tested to ensure excellent performance, service life and durability on high demand North American engines as well as all import applications..
Many SVIS systems are now supplied with fuel injector “interface harnesses” these harnesses allow the installer to just “plug & play” the injector wiring portion of an installation, cutting hours of work (and the potential for wiring errors) greatly.
|Printable Version PDF|
Technocarb Equipment (2004) Ltd. #4 - 30435 Progressive Way, Abbotsford, BC Canada V2T6W3
Ph: 604-854-6264 TF: 877-888-5666 www.technocarb.com Fax: 604-854-6802 E-mail: firstname.lastname@example.org